Honeywell HR 10 F - Deleting the Heating and Economy Periods; Adaptation at the Radiator Valve; Activating Automatic Adaptation

Adapting
25
Deleting the heating and economy periods
Whenever a heating period is deleted, the corresponding
economy period has to be deleted too, and vice versa.
► Proceed as described in the above sections on "Changing heating
and economy periods". Turn the adjusting ring respectively to the
right until
--:--
is displayed.
Adaptation at the radiator valve
Activating automatic adaptation
The automatic adaptation has to be activated after you have replaced
the radiator valve, e.g. after you have moved or have replaced the
radiator.
► Remove the batteries from the battery compartment.
► Press the button and re-insert the batteries with the button
depressed.
is displayed.
aD 2
to
aD a
are displayed
consecutively. The radiator controller carries out the automatic
adaptation.