Mounting
13
Inserting batteries into the operating unit
The battery unit of the drive unit does not have any function.
► If necessary, remove any discharged batteries from the operating
unit (please also refer to Setting the date and time, Page 14).
Batteries should not be disposed of in the household garbage.
You may be required by local law to dispose of discharged
batteries in a certain manner.
Always replace both batteries.
Only use 1.5 V mignon batteries of the type LR06.
Ensure that the polarity is correct.
► Insert the batteries into the
battery compartment.
► Position the housing cover
correctly at the top and latch it
into the latching nose on the
housing bottom.
The mounting has been completed.
The automatic adaptation* is activated.