EasyManua.ls Logo

Honeywell HX2 - Li-Ion Battery; Battery Connectors; Standard Battery

Honeywell HX2
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Li-Ion Battery
Main battery charging is handled exclusively by the HX2 Battery Charger/analyzer and the battery charger integrated into the
HX2powered cradle.
The Standard battery is much thinner than the Extended battery.
Each battery will fit in the battery sleeve on an armband, hip flip and the voice case.
Note: Do not allow water or chemical cleaning agents of any kind to come in contact with the battery
charging contacts or the battery cable connector; they may be damaged. If necessary, clean them
with a soft-bristle, dry brush or compressed air.
Battery Connectors
1. Battery Charge/Connect Terminals
2. Battery Cable Connector
Note: When placing the tethered battery in an armband or hip flip battery sleeve, ensure the Battery
Charge/Connect terminals are protected from accidental damage by keeping them covered by the
sleeve fabric at all times.
Standard Battery
1-9

Table of Contents

Related product manuals