Ring Scanner/Imager
1. Connect
2. Ring on Left Hand
3. Ring on Right Hand
4. Press Down
5. Remove
When you want to switch connectors from left to right, or vice versa, first gently press downward on the Retaining Clip, then
pinch and pull the cable connector (not the cable!) straight up and away from the HX2. Do not use a metal object, or extreme
force, to remove the cable connector from the HX2.
Re-connect cables and reassemble the HX2 body-worn components.
Attach HX2, Ring and Battery to Armband
1. Connect ring and battery cables
2. Mount assembly on arm and ring on finger
3. Plug battery into cable attached to HX2
4. Final assembly
2-4
To Next Page
Loading...
