Slip the HX2 into the Rubber Boot 2-9
Assemble the HipFlip 2-10
Connecting the Headset Cable 2-11
Adjust Headset / Microphone and Secure Cable 2-12
Connect / Disconnect Battery 2-13
Connect Battery 2-13
Disconnect Battery 2-13
Tapping the Touchscreen with a Stylus 2-14
Set Date and Time Zone 2-15
Grab Time Utility 2-15
Autolaunch Time-Sync 2-15
Synchronize with a Local Time Server 2-15
Set Speaker Volume 2-16
Using the Keypad 2-16
Using the Control Panel 2-16
Set Power Scheme Timers 2-17
Battery Power Scheme 2-17
AC Power Scheme 2-17
Touchscreen 2-18
Calibrating the Touchscreen 2-18
Adjusting the Display Backlight Timer 2-18
Apply the Touchscreen Protective Film 2-18
Setup Terminal Emulation Parameters 2-19
Using the AppLock Switchpad 2-20
Using the Keypad 2-20
Using the Touchscreen 2-20
Connecting Bluetooth Devices 2-21
Taskbar Connection Indicator 2-21
LED Connection Indicator 2-21
Reboot 2-22
Warm Boot 2-22
Cold Boot 2-22
Cleaning the Touchscreen and Scanner Aperture 2-23
Startup Help 2-24
Continuous Scan Mode 2-24
Chapter 3: Product Agency Compliance - HX2 3-1
Laser Light Safety Statement 3-3
Important Safety Warnings - Desktop Cradle 3-5
Chapter 4: Technical Assistance 4-1
ii
To Next Page
Loading...
