ICON 100 SERIES INSTALLATION GUIDE
H. When the controller is used in appliances where any malfunction of
said controller could cause a form of risk to persons, animals or things,
it is ABSOLUTELY MANDATORY to provide a suitable
protective/safety device, in addition to the controller, which
independently starts to operate in case of a failure.
I. The controller cannot be used as a critical component in life-support
devices or systems without a written approval expressly issued by the
legal representative of Honeywell.
CAUTION
Disconnect the power supply before you begin installing the Icon controller.
Do not reconnect the power supply until you have completed installation.
EN1B-0004UK07 R1003
5
To Next Page
Loading...
