Honeywell INNCOM PC-503

To Next Page

The PC-503 LEDs indicate transmission (Tx)

and reception (Rx) with the computer.

Designed to work with the

INNTOOL/EngINN* room control

application, the PC-503 comes

with a USB A Male-to-USB Mini B

Male cable to provide power and

enable communication to a laptop

or personal computer in

the installation and

commissioning process.

INNCOM PC-503

COMMISSIONING

TOOL

PARAMETER PC503

PART NUMBER 201.503

RF DATA RATE 250kbps

ANTENNA TYPE SMT

INDOOR RANGE 70FT

TRANSMIT POWER 3mW (+5dBm)

RECEIVE SENSITIVITY -95dBm

FREQUENCY BAND 2.4GHz

ENCRYPTION AES128

PROTOCOL 802.15.4

FREQUENCY CHANNELS 1126

INPUT VOLTAGE 5VDC (USB)

OPERATING AMBIENT TEMPERATURE 0°C40 °C

LEDs

FLASH TO SHOW TRANSMIT AND RECEIVE

RF FRAMES.

SPECIFICATIONS

*IMPORTANT NOTE PC-503 will not work with the INNCOM SNEEZER or any other INNCOM

legacy tool. PC-503 is an RF-only device and does not provide either S5 or IR5 interface.

Need help?

Do you have a question about the Honeywell INNCOM PC-503 and is the answer not in the manual?

Summary

INNCOM PC-503 Specifications

INNCOM PC-503 Compliance Information

FCC Compliance Rules

Details FCC rules for operation, including conditions for interference and user modifications.

Industry Canada Compliance Rules

Details Industry Canada's license-exempt RSS rules and operational conditions.