Need help?Do you have a question about the Honeywell NOTIFIER ONYXWorks NFN Gateway and is the answer not in the manual?
General| Power Supply | 24 VDC |
|---|---|
| Operating Temperature | 32°F to 120°F (0°C to 49°C) |
| Humidity Range | 10% to 93% non-condensing |
| Model | NFN Gateway |
| Compatibility | NOTIFIER fire alarm systems |
| Connectivity | Ethernet, RS-232, RS-485 |
| Protocols Supported | ONYXWorks, NOTI-FIRE-NET |
| Functionality | Gateway for fire alarm system integration |
Lists all hardware and software components necessary for NFN Gateway installation.
Provides step-by-step instructions for physically mounting NFN Gateway components.
Explains how to connect the power supply to the NFN Gateway.
Details the various cable connections required for the NFN Gateway.
Outlines the overall process for configuring the NFN Gateway.
Steps to prepare a PC for configuring the NFN Gateway, including software installation and connection.
Steps to configure the PC's network settings to include the NFN Gateway's IP subnet.
Details how to establish the initial connection between the configuration PC and the NFN Gateway.
Step-by-step guide for configuring the NFN Gateway's network and operational settings.
Guides on how to set the IP address for the NFN Gateway on the IP network.
To Next Page