Overall Gateway Configuration Process Flow Diagram NFN Gateway Overview
13NFN Gateway Installation & Operation Manual - P/N: 52306:Rev: D 06/01/07
1.3 Overall Gateway Configuration Process Flow Diagram
Figure 1.5 Overall Gateway Configuration Process Flow Diagram
“CAB3/CAB4 Cabinet
Installation” on page 20
“NFN Gateway Hardware
Installation” on page 21
“Network Communication
Module Installation” on
page 22
“NFN Gateway Power
Connection” on page 23
“NFN Gateway Cable
Connections” on page 24
“Install the NFN Config
Tool on the Configuration
PC” on page 30
“Connect the
Configuration PC to the
NFN Gateway” on
page 30
“Add the IP Subnet of the
NFN Gateway into the
Configuration PC” on
page 32
Refer to Section 3, “NFN Gateway Configuration”
Start
“Default Gateway
Connection” on page 33
Finished
“Gateway Settings” on
page 35
“NCM Address Setting”
on page 35
“Time Settings” on
page 36
“Login Password
Settings” on page 37
Refer to Section 2, “NFN Gateway Embedded Installation”
“IP Address Setting” on
page 34