64 CV41 Vehicle Mount Computer (Windows CE) User Guide
Test the GPS Receiver
Use this section to learn how to test the GPS receiver on the CV41 using the Gobi Con-
nection Manager.
1. Make sure WWAN communications is enabled. For more information, see Use
WWAN and GPS Communications.
2. Make sure an external GPS antenna is connected. For more information, see
Connect an External Antenna.
3. Select Start > Programs > GobiCM > GobiCMExe.
4. Select the GPS tab and tap Start. The Gobi Connection Manager shows your current
location.
5. Tap Stop to finish the test.
To Next Page