Honeywell GmbH 9 MU1H-1417GE23 R1114
GB
1. Safety Guidelines
1. Follow the installation instructions.
2. Use the appliance
• according to its intended use
• in good condition
• with due regard to safety and risk of danger.
3. Note that the appliance is exclusively for use in the appli-
cations detailed in these installation instructions. Any
other use will not be considered to comply with require-
ments and would invalidate the warranty.
4. Please take note that any assembly, commissioning,
servicing and adjustment work may only be carried out by
authorized persons.
5. Immediately rectify any malfunctions which may influence
safety.
2. Application
The softening device KaltecSoft KS10S serves to soften of
partially soften drinking water. Use of a softening device
reduces or excludes malfunctions and damages by limescale
in water-bearing pipes and apparatuses and valves
connected to them. A backflow of treated drinking water is not
possible due to a backflow preventer installed in the device
input.
3. Description of function
The softening device is controlled by a highly modern micro-
processor. Using the integrated consumption counter the
microprocessor calculates the individual consumption
characteristics and the remaining capacities resulting thereof
as well as the optimal time for the regeneration.
Regeneration
The regeneration is done in 4-day intervals, i.e. at the latest 4
days after the last regeneration the next regeneration is initi-
ated (independent of the water consumption).
If 97 % of the calculated capacity has been reached, a rege-
neration is initiated independently of the 4-day interval.
During the regeneration, untreated water can be taken out.
Disinfection
The softening device is equipped with a disinfection unit that
disinfects all drinking water porting parts of the softening
device during each regeneration.
Clean-Feature on KS10S-30
In this cleaning function, a backflow takes place first with a
fast rinse cycle before the normal regeneration begins. This is
needed especially for water that contains iron and/or a high
content of sediments (sand, soil, dirt, etc.).
4. Applications recommended by Honeywell
KS10S-30 is certified by DVGW (Registration No.
NW9151CO0166) for use in houses for 6-8 families or up to
20 persons.
5. Application
6. Technical data
The plant is designed for operation with salt tablets (acc. DIN
EN 19604).
7. Scope of delivery
The softening device consists of:
• Housing
• Microprocessor
• Control panel with status indicator
• Bottle with monodisperse ion exchanger
• Bypass valve with integrated diluting valve
• External transformer
• Disinfection unit
• Rotary disc valve
• Corrugated pipe connection hoses
• Total hardness measuring instrument
8. Assembly
8.1. Installations Guidelines
• All works should only be carried out by a qualified person
• Ensure that installation is not subject to freezing or
extreme heat
- Avoid direct exposure to sunlight.
• The softening device should rest on an even surface.
• If the input pressure is more than 5 bar, then a pressure
reducer needs to be installed ahead of the softening
device according to DIN 1988.
• It should be checked whether a dosing device to prevent
corrosion should be added to the plant.
KS10S-30 1-3 family dwelling
KS10S-60 3-8 family dwelling
Medium Drinking water
Ambient temperature 2-40 °C
Nominal pressure PN 10
Water temperature 1-40 °C
Operating pressure 1.3 - 8.5 bar
Flow rate max. 3.2 m
3
/h
Pressure loss during max. flow rate2.0 bar
Mains voltage (ext. transformer) 230 V / 50 Hz
Micro fuse 24 V / 50 Hz
Power consumption 2 W
Protective class IP 22
Connection size 1" internal thread
Connection water output 1/2" hose nozzle
To Next Page
Loading...
