Honeywell KI 208 User Manual

INSTALLATION MANUAL
KI 208, KI 209
NAVIGATION INDICATORS
MANUAL NUMBER 006-00140-0004
Revision 4, August 2002
h
RELEASED FOR THE EXCLUSIVE USE BY: AIRCRAFT ELECTRONICS ASSOCIATION
UP536434

Honeywell KI 208 Specifications

General

Brand	Honeywell
Model	KI 208
Category	Touch Panel
Language	English

Summary

Section I General Information

1.7 TSO’d System Requirements

Specifies requirements for a fully TSO’d navigation system.

1.7.1 Navigation Receiver Requirements

Details requirements for navigation receivers used with KI 208/209.

1.7.2 Glideslope Receiver/Converter Requirements

Specifies requirements for glideslope receivers/converters used with KI 209.

1.7.3 Fully TSO’d Systems

Lists navigation systems compatible for fully TSO’d configurations.

Section II Installation

2.3 KI 208, KI 209 Installation Procedure

Step-by-step guide for installing the KI 208 and KI 209 indicators.

2.4 Post Installation Checkout

Procedures for testing the equipment after installation.

2.4.1 Ramp Test Procedures

Details on performing a ramp test for VOR/ILS system functionality.

2.4.2 Flight Test Procedures

Guidelines for conducting flight tests to verify system performance.

Outline and Mounting Drawing

Typical Interconnect Diagram

Non-TSO’d System Interconnect

KI 209 System Interconnect Diagram

Section III Operation

3.1 Equipment Operation Overview

General overview of operating the KI 208 and KI 209 indicators.

3.1.1 VOR Operation

3.1.2 Localizer Operation

3.1.3 Glideslope Operation

3.2 Indicator Control Functions

KI 208 Control Functions

KI 209 Control Functions

Control Display Elements