Honeywell Le Sucre - Page 5

5
To set the system when you leave your premises: Total arm
1. Press this button.
2. Present your fob in front of this area on the Badge reader.
3. The green light flashes during the exit delay.
4. Exit the premises before the end of the beeps (faster at the
end).
To set the system when you are still in your premises: Partial arm
1. Press this button.
2. Present your fob in front of this area on the Badge reader.
3. The green light flashes during the exit delay and remains
flashing.
To unset the system
1. The green light is turned on (lit or flashing).
2. Present your badge in front of this area on the Badge reader.
3. The green light turns off.