The Badge reader lights
Set/Unset status (green):
Fast flashing during the entry/exit delay
Slow flashing when the system is in partial arm mode
Off when the system is unset and after the exit delay
Defaults status (red):
On when a default is present (detailed on the webserver)
Slow flashing in case of Badge reader low battery
Off in normal situation
Intrusion status (orange):
On when an intruder alarm occurred when the system was set
Will be reset at the next set action
Technical status (orange):
On when an alarm smoke detection occurred
Fast flashing during for other alarms (detailed on the webserver)
To Next Page
Loading...
