Honeywell LYNX Touch Series - LYNX Touch Programming Default Values

LYNX Touch Installation and Setup Guide
- 64 -
LYNX Touch Programming Default Values
Program Function Configuration 1 Configuration 2 Configuration 3 Configuration 4
Downloader
Phone Answer Yes Yes Yes Yes
Ans. Machine Defeat Yes Yes Yes Yes
Modem Speed (Future Use) Slow Slow Slow Slow
Ring Counter 2 2 2 2
Callback Number Blank Blank Blank Blank
Flexible Callback No No No No
Number 1 1 1 1
Sounder
Burglary Alarm Sound Yes Yes Yes Yes
Burglary Bell Timeout 4 Minutes 4 Minutes 4 Minutes 4 Minutes
Fire Bell Timeout 4 Minutes 4 Minutes 4 Minutes 4 Minutes
Arm Confirm None None None None
System Settings
Entry Delay 1 30 Seconds 30 Seconds 30 Seconds 30 Seconds
Entry Delay 2 30 Seconds 30 Seconds 30 Seconds 30 Seconds
Exit Delay 60 Seconds 60 Seconds 60 Seconds 60 Seconds
Backlight Timeout No No No No
Quick Arm Yes Yes Yes Yes
Quick Exit Yes Yes Yes Yes
Restart Exit Time Yes Yes Yes Yes
Force Bypass No No No No
Exit Warning Yes Yes Yes Yes
Auto Stay Arming Yes Yes Yes Yes
Lack Of Usage Notify Disabled Disabled Disabled Disabled
Power-Up In Previous Yes Yes Yes Yes
Display Alarm Cancel Yes Yes Yes Yes
Display Exit Time Yes Yes Yes Yes
Cross Zone Delay None None None None
Cross Zone 1 Disabled Disabled Disabled Disabled
Cross Zone 2 Disabled Disabled Disabled Disabled
Z-Wave
Z-Wave Enabled-Installed Enabled-Installed Enabled-Installed Enabled-Installed
Temperature Fahrenheit Fahrenheit Fahrenheit Fahrenheit