Honeywell Lyric - Arming and Disarming the System

– 13 –
TEST THE SYSTEM
(to be conducted weekly)
Disarm the system and close all protected windows and doors.
The
Home button should show green.
NOTE: No alarm messages are sent to your alarm monitoring
company during these tests.
1
Press
Security
icon on Home screen.
2
Press
Tools
icon on Security screen.
3
Enter the Master user code.
4
Press
Advanced
icon, then select
Walk Test
.
5
Trigger Zones
Trigger (open and close) all zones.
Listen for three beeps from the controller when
each zone is triggered.
6
Exit Test mode
When testing is completed, press the Home
button on the controller and enter the Master
User Code if prompted.