Honeywell Lyric - Use Automation Devices (Z-Wave)

Honeywell Lyric

16 pages

To Next Page

To Next Page

To Previous Page

To Previous Page

Loading...

– 8 –

USE AUTOMATION DEVICES (Z-WAVE)

1

Press

Automation

icon.

2

Select type of device.

3

Select a specific device from the list.

4

Select Desired

Action

Select the desired action for that device.

Actions vary based on the device selected.

NOTE

: In some cases, a Z-Wave device might not

report its status to the Lyric controller when an

action is initiated at the device itself (ex.

thermostat or water shutoff valve). This varies

with the manufacturer.

Table of Contents