To Next PageTo Next Page
Need help?Do you have a question about the Honeywell Maxon SMA11 and is the answer not in the manual?
General| Type | SMA11 |
|---|---|
| Category | Control Unit |
| Input Voltage | 24 V DC |
| Output Current | 2A |
| Housing Material | Aluminum |
| Operating Temperature | -20°C to 60°C |
Contact details for the manufacturer in the USA and the European sales office/importer.
Defines abbreviations and symbols used on the valve nameplate and in documentation.
Details torque values for various screws used in different MAXON valve types and sizes.
Detailed steps for proper installation, including piping, wiring, and safety precautions.
Describes non-adjustable proof of closure and auxiliary switches for full travel indication.
Specifies temperature ranges and enclosure ratings for different MAXON valve models.
Lists certifications and standards from various agencies for General Purpose and Non-Incendive valves.
Details minimum valve cycle counts approved by UL, CSA, FM, and European standards.
Explains how to interpret and configure MAXON valve model numbers based on various parameters.
Step-by-step instructions for rotating the actuator assembly on MAXON electro-mechanical valves.
Guidance for replacing or adding valve position switches in the field.
Illustrations and details for mounting brackets A and B, showing switch placement and holes.
Recommends annual operational and leak tests for valve performance and safety.
Details on field-replaceable parts, critical warnings against unauthorized repair, and inspection guidance.
Presents IEC 61508 failure rates (FIT) for MA series valves based on failure category.
Presents IEC 61508 failure rates (FIT) for MM series valves based on failure category.
