Honeywell Maxon HMA11

INSTRUCTION MANUAL
32M-95001-04
Gas Electro-Mechanical Valves
MANUFACTURER AND IMPORTER ADDRESSES
Below are the addresses and contact information for the Honeywell – Maxon manufacturing location and European sales office. The
European sales office serves as the importer and EU manufacturer's representative under the EU New Legislative Framework (NLF).
MUNCIE, INDIANA, USA – MANUFACTURER
201 East 18th Street
P.O. Box 2068
Muncie, IN 47307-0068
Tel: 765.284.3304
Fax: 765.286.8394
EUROPEAN SALES OFFICE –
IMPORTER
BELGIUM
Maxon International BVBA
Luchthavenlaan 16-18
1800 Vilvoorde, Belgium
Tel: 32.2.255.09.09
Fax: 32.2.251.82.41
Please read the operating and mounting instructions before using the equipment. Install the
equipment in compliance with the prevailing regulations.
Bedrijfs- en montagehandleiding voor gebruik goed lezen! Apparaat moet volgens de geldende
voorschriften worden geïnstalleerd.
Lire les instructions de montage et de service avant utilisation! L’appareil doit imperativement
être installé selon les règlementations en vigueur.
Betriebs- und Montageanleitung vor Gebrauch lesen! Gerät muß nach den geltenden
Vorschriften installiert werden.

Honeywell Maxon HMA11 Specifications

General

Brand	Honeywell
Model	Maxon HMA11
Category	Control Unit
Language	English

Summary

Manufacturer and Importer Addresses

Component Identification

Torque Specifications

Specifies torque values for assembly screws and bolts for different valve types.

Installation Guidelines

Auxiliary Features

Describes proof of closure switches and full travel indication switches.

Operating Environment

Covers ambient/fluid temperature limits and enclosure ratings for safe operation.

Agency Approvals and Certifications

Valve Cycle Requirements

Valve Model Number Description

Actuator Assembly Rotation

Field Installation of Valve Position Switch

General Switch Installation

Covers initial steps like powering down and accessing the terminal block for switch work.

Replacing Switches

Details the process for removing old switches and installing new ones accurately.

Adding Switches

Instructions for mounting, positioning, and wiring additional switches to the valve.

Maintenance Instructions

For More Information

Honeywell MAXON Products

Contact information and website for Honeywell MAXON branded products.

Honeywell Process Solutions

Contact information for Honeywell Process Solutions.