Honeywell MAXPRO NVR Hybrid XE - Figure 6-50 Privacy Protection Settings; Figure 6-51 Anonymization Camera Level

. . . . .
CONFIGURING MAXPRO NVR
Privacy Protection Settings (GDPR Favored)
MAXPRO NVR 5.6 Installation and Configuration Guide 201
Figure 6-50 Privacy protection Settings
At Camera Level
At camera level user can enable or disable the Anonymization based on the requirement.
1. In Configurator > Camera tab, navigate to the camera properties for the specific
camera.
2. Under Primary Stream > Preference tab, select the Anonymization Enabled check box
as shown below. By default it is not selected.
3. Environment: Select the preferred Environment option to anonymize the live video
scene based on the scene environment.The available options are:
• Variable Scene: If the scene contains both stationary and moving people or
objects then select this option to anonymize the objects in the scene.
• High Motion Scene: To anonymize the objects in high motion in the scene.
• Still Scene: To anonymize the objects in a scene where the scene
predominantly contains stationary people and objects.
Figure 6-51 Anonymization Camera Level