EasyManuals Logo

Honeywell Minitrend QX Installation Instruction

Honeywell Minitrend QX
8 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
43-TV-33-65 iss.5 GLO Jan 21 UK 8
Once all the cables have been reconnected slide the front surround assembly onto the chassis plates and fit the 4 self
tap screws that hold the unit together.
Slide the case back onto the recorder ensuring it is fitted the right way round. The cooling slots should be at the top of
the unit.
Finally fit the four M3 screws that hold the case to the chassis.
Touch Screen Calibration
Calibration of the touch screen may not be required.
Test the touch screen calibration by using the “Touch Test” option on the recorder. This allows you to touch the screen
and check a cursor moves to the correct position. This can be accessed by entering the “Main Menu”, then “Screen”,
then “Touch Test”.
If the touch screen needs recalibrating:
Exit the touch test screen with the “finish” button the press “Calibrate”. This will take you to the calibration screen.
Using the stylus touch the screen at the centre of the cursor. Hold the stylus there until the cursor moves. Continue
touching and holding on the cursor until calibration is complete.
Once calibration is complete, touch the screen once more to exit calibration.
The new calibration can be tested again with “Touch test” if required.
More information on touch screen calibration can be found in the product user manual.
Copyrighted Materials. For more information please contact your supplier.

Other manuals for Honeywell Minitrend QX

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell Minitrend QX and is the answer not in the manual?

Honeywell Minitrend QX Specifications

General IconGeneral
BrandHoneywell
ModelMinitrend QX
CategoryVoice Recorder
LanguageEnglish

Related product manuals