EasyManua.ls Logo

Honeywell MK VI - Honeywell EGPWS Line Maintenance Manual; Flap and Self-Test Discretes

Honeywell MK VI
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
060-4314-000 • Rev. C - May 2004
44 MK VI & MK VIII EGPWS Pilot Guide
Options
continued
TAD Alternate Pop Up – If TRUE, disables automatic terrain
display when TAD or Obstacle alert is active.
Smart “500” Callout – Available in certain Altitude Callout
options for “Five Hundred” called out at 500 feet Radio Alti
-
tude during non-precision approaches.
Bank Angle Enable – Enables Bank Angle alerts.
Audio Voice Menu – Selects the voice (phrase) that is used
for audio alerts.
Peaks Enable – Enables Peaks display mode with elevation
numbers and alternate density pattern.
Steep Approach Enable – Enables Steep Approach (Mode 1
Excessive Descent Rate) alert biasing.
Flap Reversal – Reverses landing flap input discrete logic.
GPS Altitude Reference – Defines the GPS Altitude input as
referenced to WGS-84 or MSL.
Lamp Format – One of two lamp formats are available.
Lamp Format 1 specifies only Mode 5 glideslope alerts
activate the caution (amber) lamp output. All other alerts
activate the warning (red) lamp output
Lamp Format 2 specifies all "Pull-Up" warning alerts ac-
tivate the warning (red) lamp output. All caution alerts
activate the caution (amber) lamp output (FAA requirement
for new installations)
NOTE: Mode 6 advisories do not activate any lamp output.
Additional input/output discretes are used to control or define
EGPWS operations:
Glideslope Inhibit – Inhibits Mode 5 Glideslope alerting.
Normally used for backcourse approaches.
Mode 6 Low Volume – Selects reduced Mode 6 volume
(-6db). This is sometimes connected to a Windshield Wiper
system to increase EGPWS audio while wipers are operating
Audio Inhibit – disables all EGPWS audio outputs.
Steep Approach Select – Selects (activates) Steep Approach
(Mode 1 Excessive Descent Rate) alert biasing to reduce nui
-
sance alerts when Steep Approach Enable is true.

Other manuals for Honeywell MK VI

Related product manuals