Need help?Do you have a question about the Honeywell MAXPRO MPIP2000U Series and is the answer not in the manual?
General| Category | Security System |
|---|---|
| Camera Type | IP Camera |
| Model | MPIP2000U Series |
| Video Compression | H.264 |
| Network Interface | 10/100 Mbps Ethernet |
| Input Voltage | 100 ~ 240 VAC |
| Operating Temperature | -10 °C ~ +55 °C (+14 °F ~ +131 °F) |
| Humidity | 10 % ~ 90 % |
| Communication Interface | Ethernet |
| Protocol Support | DHCP, DNS, DDNS, NTP, SMTP |
| Compatibility | ONVIF |
Outlines the guide's scope, intended audience, and where to find additional resources.
Introduces the MAXPRO Intrusion Series panels and details their key features.
Details procedures for battery, burglary, smoke detector, and siren tests.
Covers installer guidance, event notification, indications, area reporting, event codes, and technical support.
Lists specifications for control panels, modules, and cable requirements.
Details system listings, certifications, and statements from relevant agencies.
Outlines general installation workflows and covers cabinet overview, parts, mounting, and mercantile guidelines.
Details installing the control panel, its parts, connectors, LEDs, tamper switches, and network connection.
Explains wiring for inputs, outputs, sounders, smoke detectors, and LTE module configuration.
Introduces the optional 4G/LTE module for cellular communication.
Covers module parts overview, SIM card, SMA cables, and cabinet mounting.
Guides on connecting antennas and configuring the LTE module in MAXPRO Cloud.
Provides procedures for disconnecting, reconnecting, and antenna system details.
Details SIM card swapping and LED indicators on the LTE module.
States warnings related to RF exposure compliance for the device.
Introduces IB2 devices and specifies suitable cable types for their wiring.
Details MPI keypad features, operational commands, mounting, wiring, and optional plate usage.
Covers programming, LED indicators, default users, network settings, factory reset, and panel decommissioning.
Introduces the DCM, lists features, and summarizes connections, including zone configurations and programming.
Introduces the MPI Relay Module, lists features, and provides mounting instructions.
To Next Page