Honeywell MAXPRO Intrusion MPIP2000U/3000U Series Installation and Setup Guide
800-23044 Rev. A draft_11 11
1 About this Document
1.1 Scope
This document provides full instructions for installing the hardware and for
initial programming of a MAXPROIntrusion Control Panel and its associated
peripherals.
You can find the full programming information in the help file within the
MAXPRO Cloud configuration tool, and in the MAXPRO Cloud Configuration
Guide (doc. no. 800-24096).
This Installation and Setup Guide covers the following topics:
l The installation of the MAXPROIntrusion (MPI) hardware:
o
Cabinet for Control Panel or Remote Power Supply
o
MPI Control Panel
o
MPI peripherals: Keypads, Remote Power Supply, Door ControlModule,
Relay Module, and Zone Expander.
o
LTE module
o
V-Plex devices.
l Summary information for configuration in MAXPRO Cloud
l Testing andcommissioning, hand-over to the customer
l Technical specifications of all MPI hardware
l Agency information.
Caution!
For instructions on maintaining compliance with ULand ULC
standards, see Agency Statements on page176.
This Installation and Setup Guide does notcover:
l Full configuration instructions for MAXPROCloud. For details, see the
MAXPRO Cloud Configuration Guide (doc. no. 800-24096).
l Cybersecurity of the MAXPRO Intrusion installation. For details, see the
MAXPRO Intrusion Security Manual (doc. no. 800-25507).
l The daily usage of the MAXPRO Intrusion system. For details, see the
MAXPRO Intrusion User Guide (doc. no. 800-23041).
To Next Page
Loading...
Need help?
General
