Honeywell MAXPRO MPIP2000U Series User Manual

Honeywell MAXPRO Intrusion MPIP2000U/3000U Series Installation and Setup Guide
800-23044 Rev. A draft_11 9
8.12.4 System Area 133
8.13 Scheduling and Holidays 134
8.14 Permission Groups 134
8.15 People 135
8.15.1 General 135
8.15.2 Intrusion Authority Levels 136
8.16 Controller Rules 138
8.17 Floor Plan 139
8.18 Clock Synchronisation 139
8.19 Updating the Firmware 139
9 Testing and Commissioning 142
9.1 Battery Test 142
9.2 Burglary Walk Test 142
9.3 Armed Burglary System Test 143
9.4 Smoke Detector Test 144
9.5 Siren Test 144
10 Important Information 145
10.1 To the Installer 145
10.2 Turning the System over to the User 145
10.3 Contacting Technical Support 146
11 Events 147
11.1 Event Notification Priority 147
11.2 Indications 147
11.3 Event Reporting per Area 148
11.4 MPI Events and Contact ID Codes 148
11.4.1 Events List 148
11.4.2 Zone Identifiers 153
11.5 MPI Events and SIA Codes 153
12 Specifications 160
12.1 MPI Control Panel 160
12.1.1 Specifications 160
12.1.2 Current Ratings 162
12.2 MPI Cabinet 162
12.3 MPI Remote Power Supply 163
12.3.1 Specifications 163
12.3.2 Current Ratings 165
12.4 MPI Keypad 165
12.5 MPI Door ControlModule 167
12.6 MPI Relay Module 168
12.7 MPI Zone Expander 168
12.8 MPI LTE Module 169
12.9 Cable Type Requirements 171

Honeywell MAXPRO MPIP2000U Series Specifications

General

Brand	Honeywell
Model	MAXPRO MPIP2000U Series
Category	Security System
Language	English