How to troubleshoot Honeywell MM14CCSBB Air Conditioner that won't start?
If your Honeywell Air Conditioner isn't starting, first ensure it has power by checking the outlet. Replace the remote control batteries. Also, make sure the power cord is securely plugged in. If you're in the USA, Canada, or Mexico, check the safety LCDI plug and reset it. If problems persist, contact customer support.
What to do if Honeywell MM14CCSBB Air Conditioner runs but no cooling?
If your Honeywell Air Conditioner runs but doesn't cool, ensure that all doors and windows are closed. Clean the air filter, and properly reinstall the exhaust hose. Also, reduce the temperature setting on the control panel and remove any blockages from the air outlet or intake.
Why Honeywell Air Conditioner runs a short while only?
If your Honeywell Air Conditioner runs for only a short time, try lowering the thermostat temperature setting. Make sure the exhaust hose is properly connected and ensure there are no tight bends in the air exhaust hose.
What to do if Honeywell Air Conditioner will not run and water full indicator light is ON?
If your Honeywell Air Conditioner will not run and the water full indicator light is on, it means there is excess water condensation inside the tank. You should drain the water.
General| Type | portable |
|---|---|
| Color | black |
| Operating Area Size | 700 square feet |
| Cooling Settings | 1 |
| Seasonally Adjusted Cooling Capacity | 7500 british thermal units |
| Heater | no |
| Fan Airflow Rate | 265 cubic feet per minute |
| Filter | washable |
| Hose | single |
| Remote Control | yes |
| Timer | yes |
| Sleeping Mode | yes |
| Current | 10.8 amperes |
| Depth | 15.8 inches |
| Height | 34 inches |
| Width | 19.9 inches |
| Net Weight | 73.9 pounds |
Key instructions for optimal performance and proper setup before initial use.
Crucial warnings and precautions for safe operation and handling of the appliance.
Diagram and list of all components and controls of the portable air conditioner.
Details of all parts included in the window venting installation kit.
Instructions on how to connect the exhaust hose and window bracket for setup.
Explanation of the buttons and display on the unit's primary control interface.
Details on operating modes (Cool, Dehumidify, Fan) and their associated functions.
How to adjust fan speed settings (High, Medium, Low) for desired airflow.
Instructions for setting auto switch-off and auto switch-on timers.
How to adjust the temperature and toggle between Celsius and Fahrenheit.
Guide to using the remote control for all appliance functions and settings.
Procedures for cleaning the unit's exterior and the air filter for optimal performance.
Steps for proper storage, including draining, cleaning, and protecting the unit.
How to manually drain accumulated water in AC and Dehumidifier modes.
Instructions for setting up continuous drainage in Dehumidifier mode.
To Next Page