To Next PageTo Next PageWhat to do if my Honeywell Air Conditioner does not start?
If your Honeywell Air Conditioner isn't starting, first ensure it's receiving power. Check that the power cord is properly plugged in, and if you're in the USA, Canada, or Mexico, reset the safety LCDI plug. If the issue continues, contact customer support. Also, try replacing the remote control batteries.
Why is my Honeywell MN10 running but not cooling?
If your Honeywell Air Conditioner is running but not cooling, ensure that all doors and windows are closed. A dirty air filter can also cause this issue, so clean it. Check that the exhaust hose is properly reinstalled. Also, make sure the temperature setting isn't too high and that neither the air outlet nor the intake is blocked.
What to do if my Honeywell Air Conditioner runs a short while only?
If your Honeywell Air Conditioner runs for only a short time, try lowering the thermostat temperature setting. Also, ensure that the air outlet isn't blocked and that the exhaust hose is correctly connected.
General| Type | Portable Air Conditioner |
|---|---|
| Cooling Capacity | 10, 000 BTU |
| Fan Speeds | 3 |
| Power Supply | 115V / 60Hz |
| Refrigerant | R410A |
| Digital Display | Yes |
| Remote Control | Yes |
| Filter Type | Washable |
| Room Size | Up to 450 sq. ft. |
| Modes | Cool, Fan, Dehumidify |
| Noise Level | 52 dB |
| Timer | Yes |
Detailed instructions for setting up the unit and exhaust hose, ensuring proper connections.
Overview of the unit's control panel buttons and indicators for mode, fan speed, and temperature.
