7
USE & OPERATION
CONTROL PANEL
FUNCTION BUTTONS
The Power Control turns the unit on and off. When the unit is plugged in, this button lights up indicating it
is in a Standby Mode ready to be switched on anytime.
POWER CONTROL
While the unit is turned on, press the timer button then press the + or - to select the number of hours
you would like the unit to continue to run. The unit will turn off automatically.
AUTO TURN OFF:
While unit is running, press the button and the display will flash. While the display is flashing,
press the + or - button to select the number of hours you want the unit to turn OFF automatically.
AUTO TURN ON:
When unit is in a standby mode (plugged in with power light on), then press the + or - button to select
the number of hours until you want the unit to automatically start running.
TIMER CONTROL
1) Timer Control 4) Mode Control 7) Timer Light
2) Fan Speed Control 5) Power Control / Standby Mode 8) Filter Alert
3) Timer / Temperature Set Controls 6) Warning Light (when flashing)
EN
(6) (7) (4) (2) (3) (8)
(5) (1)
To Next Page
Loading...
Need help?
General
