Honeywell MS3105J3030 - User Manual

INSTALLATION INSTRUCTIONS
62-0274-07
3 Nm, 5 Nm Series Spring Return
Direct Coupled Actuators
MS3103, MS3105, MS4103, MS4105, MS7403, MS7405, MS7503,
MS7505, MS8103, MS8105
N314
MS3103, MS3105, MS4103, MS4105, MS7403, MS7405,
MS7503, MS7505, MS8103, MS8105 Spring Return Direct
Coupled Actuators (DCA) are used within heating, ventilating,
and air-conditioning (HVAC) systems. They can drive a variety
of quarter-turn, final control elements requiring spring return
fail-safe operation.
Applications include:
• Volume control dampers, mounted directly to the drive
shaft or remotely (with the use of accessory hardware).
• Quarter-turn rotary valves, such as ball or butterfly valves
mounted directly to the drive shaft.
• Linear stroke globe or cage valves mounted with linkages
to provide linear actuation.
• Available with cable on select models
SPECIFICATIONS
Models:
 See Table 1.
Device Weight:
 3.5 lbs (1.60 kg)
Ambient Operating Temperature:
 -40° to 150°F (-40° to 65°C)
 -22° to 150°F (-30° to 65°C) (Two position only)
Shipping and Storage Temperature:
 -40° to +150°F (-40° to +65°C)
1
Number represents range
2
2-10 Vdc
3
0/2-10 Vdc
Table 1. Models.
Power Supply
Model Number
Model Number
(including 3 ft. whip) Torque Voltage
VA
Driving
1
Drive
(sec) Control Input/Output Description
SPDT
Aux
Switch
MS3103J1030 27 lb-in
(3 Nm)
24 Vac/dc
@50/60 Hz +/-
20%
24Vdc+/-10%
6/3 90 Sylk-enabled 0
MS7403A2030
Floating, Modulating
2
,Three-Position, Feedback
0
MS7503A2030
Floating, Modulating
3
, and Feedback
0
MS7503A2130 1
MS8103A1030 45 Two-Position (SPST) 0
MS8103A1130 1
MS4103A1030 100-250 Vac
@50/60Hz
6/9 45 Two-Position (SPST) 0
MS4103A1130 1
MS3105J3030 44 lb-in
(5 Nm)
24 Vac/dc
@50/60 Hz +/-
20%
24Vdc+/-10%
6/3 90 Sylk-enabled (5 addresses & Analog Output) 0
MS3105J3130 1
MS7405A2030
Floating, Modulating
2
, Three-Position, Feedback
0
MS7505A2030 MS7505W2030
Floating, Modulating
3
, and Feedback
0
MS7505A2130 MS7505W2130 1
MS8105A1030 MS8105W1030 45 Two-Position (SPST) 0
MS8105A1130 MS8105W1130 1
MS4105A1030 100-250 Vac
@50/60Hz
6/9 45 Two-Position (SPST) 0
MS4105A1130 1

Honeywell MS3105J3030 Specifications

General

Brand	Honeywell
Model	MS3105J3030
Category	Controller
Language	English

Summary

Installation Instructions

Product Specifications

Typical Specification

Installation

Location

Describes how the actuators are designed to mount directly to a damper external drive shaft.

Preparation

Steps before mounting the actuator, including determining opening direction and shaft size.

Determine Appropriate Mounting Orientation

Guidelines for mounting the actuator to open a damper in a specific rotational direction.

Measure DamperValve Shaft Length

Instructions on measuring shaft length to correctly position the shaft coupling.

Wiring

Access Cover Removal

Procedure for safely removing the actuator access cover to expose terminal blocks.

Operation

Actuator Override

Methods to override the control signal for freeze protection or similar applications.

Checkout

ModulatingFloating Operation

Steps to verify modulating or floating control signal operation.

Spring Return Operation

Procedure to test the actuator's spring return functionality to the 0% position.

Feedback Operation

Checks to ensure the feedback signal accurately reflects actuator position.

Direct Checkout

Steps to verify proper operation for direct control actuators.

Two-Position Checkout

Procedure to confirm correct operation of two-position actuators.

Sylk-enabled (S-BUS) Checkout

Verification steps for actuators communicating via the Sylk-enabled (S-BUS).