Honeywell Performance HBD3PR1 - Nas; Record Control; Figure 5-26 NAS Configuration Interface; Figure 5-27 Record Control Configuration Interface

www.honeywell.com/security
74 | Performance Series IP Camera Software Configuration Guide
NAS
Figure 5-26 NAS Configuration Interface
Record Control
Figure 5-27 Record Control Configuration Interface
Table 5-17 NAS Configurations
Parameter Function
Server Address Set the IP address of the server.
Remote Directory Set storage directory where recorded video and snapshots will be
stored.
Table 5-18 Record Control Configurations
Parameter Function
Pack Duration Select the file size. The default is 8 minutes.
Pre-event Record Enter a pre-record value.
For example, the system can record the four seconds of video in the
buffer. Recording begins five seconds before the event trigger.