Need help?Do you have a question about the Honeywell HBW4PER1 and is the answer not in the manual?
General| Model | HBW4PER1 |
|---|---|
| Series | Performance Series |
| Lens | 2.8mm fixed lens |
| Protection | IP67 |
| Operating Temperature | -30 °C to 60 °C (-22 °F to 140 °F) |
| Resolution | 4MP |
| Night Vision | Up to 30m (98ft) with IR |
| Power Supply | 12VDC or PoE |
| Storage | MicroSD |
| Video Compression | H.265/H.264 |
| Image Sensor | 1/2.7" CMOS |
Explains FCC compliance for the device, ensuring reasonable protection against harmful interference.
States compliance with Canadian ICES-003 standards for digital apparatus.
Declares compliance with EU directives and standards for electrical safety and emissions.
Provides guidance on the correct disposal of the product in accordance with EU regulations.
Details installation, servicing, and part replacement safety guidelines for optimal performance and safety.
Guides through the installation process of the Config Tool software on a PC for device management.
Explains how to locate and identify IP devices connected to the network using Config Tool.
Details the procedure for assigning a static IP address to the camera device via the Config Tool.
Describes how to update the camera's firmware to the latest version for improved functionality.
Explains how to access the camera's web interface for configuration and monitoring.
Details the process of accessing the camera's web client for monitoring and configuration.
Guides on installing the necessary browser plug-in for the web client to function correctly.
Explains the layout and components of the live video interface for real-time monitoring.
Details how to adjust image settings like brightness, contrast, and zoom in the live view.
Describes how to use live interface controls like digital zoom, snapshot, and record.
Explains how to safely log out of the camera's web interface.
Shows the layout and elements of the video playback interface for reviewing recorded footage.
Details the controls for playing, pausing, and navigating recorded video clips.
Explains how to create and save video clips from recorded footage.
Describes the timeline feature for navigating recorded video by time and event type.
Provides steps to search and play recorded video files from storage.
Guides on how to download complete video files or specific clips from the camera.
Explains how to view and download system-generated or manually taken snapshots.
Covers settings for picture, exposure, lighting, white balance, day/night, and IR light.
Adjusts image parameters like brightness, contrast, saturation, sharpness, and gamma.
Configures anti-flicker, exposure modes, auto iris, and digital noise reduction.
Adjusts backlight, highlight, and wide dynamic range for better image quality.
Compensates for different light sources to ensure consistent color reproduction.
Configures the camera's sensitivity and delay for switching between day and night modes.
Controls the infrared (IR) LED mode and intensity for night vision.
Sets camera profiles (Normal, Day, Night) and schedules for automatic switching.
Adjusts zoom magnification and focus manually or automatically using sliders.
Configures video streaming properties like codec, resolution, frame rate, and bit rate.
Sets constant or variable bit rates and maximum bit rates for video streams.
Configures the interval between I-frames for video compression efficiency.
Adds custom text watermarks to the video stream for identification.
Sets snapshot type, image size, quality, and interval for capturing images.
Sets the quality level for snapshots captured by the camera.
Configures the frequency of snapshot capture, specifying shots per second.
Configures privacy masks, channel titles, time titles, and text overlays on video.
Enables and configures privacy masks to obscure specific areas of the video feed.
Adds and positions a channel title on the video stream for identification.
Adds and positions a time title on the video stream for timestamping.
Adds custom text overlays to the video stream with alignment options.
Defines specific areas in the video feed for focused analysis or quality settings.
Covers TCP/IP settings, including IPv4, IPv6, and ARP/Ping configurations.
Details settings for network connections, including maximum connections and port numbers.
Explains how to enable or disable ONVIF authentication for interoperability.
Guides through setting up Point-to-Point Protocol over Ethernet (PPPoE) for internet.
Describes how to configure Dynamic DNS (DDNS) for remote access with changing IP addresses.
Explains how to set up IP filter rules for access control and remote access restriction.
Details how to configure email notifications for events and alerts.
Covers Universal Plug and Play (UPnP) settings for network device discovery.
Explains Bonjour settings for zero-configuration network discovery.
Details how to configure multicast settings for efficient data transmission.
Describes 802.1X settings for port-based network access control.
Explains Quality of Service (QoS) settings for bandwidth control and packet prioritization.
Guides on installing and importing security certificates for secure communication.
Sets up regular and holiday schedules for video recording and snapshot capture.
Configures how and where recorded video and snapshots are stored.
Specifies storage locations for recorded video and snapshots (SD card, FTP, NAS).
Details settings for using the installed microSD card for storage, including modes.
Guides on setting up an FTP server for storing video and snapshots.
Explains how to configure network-attached storage (NAS) for video and snapshot storage.
Sets recording parameters like pack duration, pre-event record time, disk full behavior, and record mode.
Sets up motion detection parameters, including working periods, areas, and recording actions.
Configures settings for detecting camera tampering and defocus events.
Sets up detection for scene changes, including working periods and recording actions.
Configures notifications for system events like SD card issues and network problems.
Configures alarm types, operations, and custom alarm tones.
Sets device name, language, video standard, and log quantity.
Configures date, time, and time zone settings, including NTP synchronization.
Adjusts the format of date and time displayed on video overlays.
Manually sets or synchronizes the camera's date and time.
Manages user accounts, groups, and permissions for access control.
Explains how to manage user groups and their associated permissions.
Details the process of creating new user groups and assigning permissions.
Allows modification of existing group permissions.
Provides steps to delete custom user groups.
Covers creating, modifying, and deleting user accounts.
Guides on creating new user accounts with specific usernames, passwords, and permissions.
Allows modification of user account details like password and permissions.
Provides steps to delete user accounts.
Explains how to reset the camera to its factory default settings.
Guides on backing up and restoring camera configuration settings.
Configures automatic maintenance functions like rebooting and deleting old files.
Details the process of upgrading the camera's firmware.
Shows how to view camera firmware and version information.
Explains how to view, back up, and delete log files.
Provides instructions on how to view different types of log files.
Guides on backing up log files.
Explains how to clear all log files.
Shows how to view currently logged-in users on the system.
To Next Page
