Need help?Do you have a question about the Honeywell equIP HBW2GR3V and is the answer not in the manual?
General| Series | equIP |
|---|---|
| Max. Resolution | 1920 x 1080 |
| IR Range | Up to 30 m (98 ft) |
| Ingress Protection | IP66 |
| Housing Material | Metal |
| Weather Resistance | Yes |
| Camera Type | Bullet |
| Minimum Illumination | 0 Lux with IR on |
| Day/Night | Yes |
| Operating Temperature | -30°C to 60°C |
| Power Supply | 12 VDC/PoE (802.3af) |
| Weight | 1.2 kg |
| Image Sensor | 1/2.8" CMOS |
| Lens | 2.8 mm |
Essential precautions for installation, operation, and maintenance of the device.
How to connect to and view the camera using a web browser.
Steps to log into the camera's web interface with credentials.
Customizing display settings and controls within the live view.
Configuring stream types and protocols for live video transmission.
Step-by-step guide to playback recorded video files.
Methods for downloading complete video files or custom clips.
Adjusting image properties, exposure, lighting, and defog.
Setting video format, resolution, frame rate, and bit rate.
Adjusting audio input/output formats, volume, and filtering.
Setting up IP addressing, subnet mask, and gateway.
Configuring IPv4 or IPv6 network parameters for the camera.
Setting up email notifications for events and system alerts.
Setting up camera alarms for inputs, outputs, and delays.
Handling events like SD card errors and network disconnections.
Setting up motion detection areas, sensitivity, and recording triggers.
Detecting and responding to physical tampering or defocusing.
Detecting and responding to changes in the camera's scene view.
Setting up detection for audio input abnormalities or changes.
Specifying storage paths for recorded video and snapshots.
Setting record length, pre-event recording, and disk full behavior.
Creating, modifying, and deleting user accounts and permission groups.
Resetting the camera to defaults and backing up/restoring settings.
To Next Page