Need help?Do you have a question about the Honeywell HEIPTZ-2201W-IR and is the answer not in the manual?
General| Model | HEIPTZ-2201W-IR |
|---|---|
| Series | Performance Series |
| Image Sensor | 1/2.8" Progressive Scan CMOS |
| Scanning System | Progressive |
| Night Vision | Yes |
| IR Distance | 100 m (328 ft) |
| IR On/Off Control | Auto/Manual |
| IR LEDs | Yes |
| Focus Control | Auto/Manual |
| Pan Range | 360° Endless |
| Presets | 256 |
| Power Loss Memory | Yes |
| Streaming Capability | Triple Stream |
| Bit Rate Control | CBR/VBR |
| Day/Night | IR Cut Filter |
| Gain Control | Auto/Manual |
| Noise Reduction | 3D DNR |
| Motion Detection | Yes |
| Defog | Yes |
| Digital Zoom | 16x |
| Flip | Yes |
| Connectivity | Wired |
| Streaming Method | Unicast/Multicast |
| Smart Phone | IOS, Android |
| Ingress Protection | IP66 |
| Weather Resistance | Yes |
| Type | PTZ Dome Camera |
| Effective Pixels | 1920 x 1080 |
| Resolution | 1920x1080 |
| Electronic Shutter Speed | 1/1s ~ 1/30, 000s |
| Minimum Illumination | 0 Lux with IR |
| S/N Ratio | More than 50 dB |
| Optical Zoom | 20x |
| Close Focus Distance | 10mm (0.39") |
| Tilt Range | -15° to 90° |
| Preset Speed | Tilt: 200°/s |
| Video Compression | H.264, MJPEG |
| Frame Rate | 30fps @ 1080p |
| Bit Rate | 32Kbps ~ 16Mbps |
| Backlight Compensation | BLC/HLC/WDR |
| White Balance | Auto/Manual |
| Region of Interest | 4 ROI |
| Privacy Masking | Yes |
| Ethernet | RJ45 (10/100Base-T) |
| Protocol | IPv4/IPv6, HTTP, HTTPS, SMTP, NTP, DHCP, DNS, PPPOE, DDNS, FTP, Bonjour |
| Interoperability | ONVIF Profile S |
| Edge Storage | MicroSD/SDHC/SDXC |
| Web Viewer | IE, Chrome, Firefox |
| Power Supply | 24 VAC / PoE+ (802.3at) |
| Power Consumption | Max. 25W |
| Weight | 3.5kg (7.7lbs) |
| Night Vision Range | 100m (328ft) |
Guidelines for safe electrical installation and operation of the PTZ.
Instructions for protecting the product during transit and storage.
Recommendations for suitable installation environments and conditions.
Attention to product labels and user manual updates.
Details of product certification marks and symbols.
Overview of the HEIPTZ-2201W-IR camera and its explosion-proof standards.
Explanation of stylized fonts, symbols, and icons used in the manual.
Important notes regarding product accuracy, updates, and manual usage.
Key features and specifications of the HEIPTZ-2201W-IR camera.
Details on the PTZ's enclosure design for explosion prevention.
Network and communication features of the PTZ camera.
Recommended environmental conditions for PTZ installation.
PC and software requirements for using the PTZ camera.
List of items included in the product package.
Visual overview and physical dimensions of the PTZ camera.
Detailed dimensions of the camera's mounting base.
Important checks and precautions before installing the PTZ.
Step-by-step guide for physically installing the PTZ unit.
Instructions for making all necessary cable connections for the PTZ.
Using the NVS software to find and configure camera IP addresses.
Steps to install the required ActiveX control for browser access.
Procedure for logging into the PTZ camera interface.
Interface and operations for viewing live video feeds from the PTZ.
Configuration options for system specifications and device information.
Viewing and editing device information such as name, serial number, and version.
Configuration for PTZ controls including protocol, address, and baud rate.
Adjusting display parameters like name, OSD, time, brightness, and contrast.
Settings for video compression, resolution, frame rate, and bitrate.
Configuration of camera exposure, AGC, shutter, color mode, and other image settings.
Configuring motion detection sensitivity, alarm schedule, and linked actions.
Setting up video tampering detection, alarm schedule, and linked actions.
Configuring IP address, subnet mask, gateway, and other network parameters.
Managing and configuring third-party platform integration.
Setting up multicast parameters for video and audio streams.
Configuring Dynamic Domain Name System for remote access.
Configuring Network Time Protocol for accurate time synchronization.
Setting up email alerts for events, including sender, receiver, and SMTP details.
Configuring FTP server details for uploading files and snapshots.
Configuring actions for system exceptions like disk full or network errors.
Managing user accounts, priorities, and permissions for system access.
Procedures for updating the device's firmware.
Checking HDD capacity, status, and performing formatting.
Restoring device settings to factory defaults or rebooting the system.
Configuring local preview window, capture paths, and file types.
Accessing and managing recorded video and snapshot files.
Searching and viewing system logs for alarms, operations, and exceptions.
Detailed technical specifications for the HEIPTZ-2201W-IR camera.
Default network ports and communication protocols for the camera.
Default IP address, subnet mask, gateway, and ports for network setup.
Explanation of DDNS and its role in remote access.
Guidance on accessing the camera via LAN/WAN.
Steps and topology for configuring static IP addresses for network access.
Methods for connecting the camera to the internet: Fixed IP, ADSL, PPPOE.
Configuration for accessing the camera via a fixed IP address.
Step-by-step guide for configuring DDNS settings.
Instructions for setting up port mapping on a TP-LINK router.
Configuration steps for accessing the internet via PPPOE.
To Next Page