Need help?Do you have a question about the Honeywell H4W4PER2 and is the answer not in the manual?
General| Series | Performance Series |
|---|---|
| Resolution | 4MP |
| Focal Length | 2.8 mm |
| IR Distance | Up to 30m |
| Night Vision | Yes |
| Ingress Protection | IP66 |
| Weather Resistance | Yes |
| Connectivity | Ethernet |
| Power Supply | PoE (802.3af) |
| Operating Temperature | -30°C to 60 °C |
| Storage | MicroSD card slot |
| Type | Dome Camera |
Install the Config Tool IP utility on your PC to access and configure the camera.
Use Config Tool to find and identify connected IP devices on your network.
Guide on assigning a static IP address to a discovered camera via Config Tool.
Instructions for updating camera firmware for single or multiple devices.
Accessing the camera's web client interface through the Config Tool.
Steps to log in to the camera using the web client for monitoring and configuration.
Install the required browser plug-in for initial web client access.
Overview of the live video interface layout and controls.
Adjusting image properties like brightness, contrast, and zoom in the live view.
Using live interface controls for zoom, snapshot, and recording.
Configuring stream type and protocol for live video output.
Securely log out from the camera's web interface.
Layout of the web client's playback interface for reviewing recorded footage.
Controls for playing, pausing, and navigating recorded video playback.
Tools for creating, stopping, and saving video clips.
Understanding the timeline for navigating recorded events by time and type.
Methods to download video files or export created video clips.
How to view and download system-generated or manual snapshots.
Adjusting picture, exposure, white balance, day/night modes, and IR light.
Setting up and managing camera profiles (Normal, Day, Night).
Adjusting camera zoom magnification and focus manually or automatically.
Setting video encoding, resolution, frame rate, and bit rate for streams.
Configuring snapshot type, image size, quality, and interval.
Setting up privacy masks, channel titles, time titles, and text overlays.
Defining areas to obscure sensitive parts of the video feed.
Adding and positioning a channel title text overlay on the video.
Adding and positioning a time title text overlay on the video.
Adding custom text overlays to the video feed.
Defining specific areas in the video frame for special attention.
Setting up IP address, subnet mask, gateway, DNS, and ARP/Ping.
Configuring peer-to-peer settings for remote connection via the HonView Touch app.
Setting maximum simultaneous connections and port numbers.
Enabling or disabling ONVIF authentication for interoperability.
Setting up Point-to-Point Protocol over Ethernet for internet connectivity.
Configuring Dynamic DNS to track dynamic IP addresses.
Restricting remote access to specific IP or MAC addresses.
Procedure to add trusted IP/MAC addresses for filtered access.
Modifying existing IP/MAC addresses in the trusted list.
Removing IP/MAC addresses from the trusted list.
Setting up email notification parameters for alerts and events.
Enabling Universal Plug and Play for network device detection.
Configuring Bonjour for zero-configuration network discovery.
Configuring multicast for efficient data transmission to multiple clients.
Setting up port-based network access control for unauthorized device prevention.
Controlling bandwidth use by prioritizing data packets.
Installing and importing security certificates for secure communication.
Setting up daily, weekend, and holiday schedules for recording and snapshots.
Specifying save locations for recorded video and snapshots (SD card, FTP, NAS).
Managing microSD card settings, including read-only, read-write, and hot swap.
Enabling and configuring FTP server settings for storing recordings.
Enabling and configuring Network Attached Storage for recordings.
Setting pack duration, pre-event record time, disk full behavior, and record mode.
Setting up motion detection parameters, working periods, and detection areas.
Configuring detection for video tampering and defocus events.
Setting up detection for changes in the video scene.
Configuring notifications for SD card and network errors, and illegal login attempts.
Setting up notifications for No SD Card, SD Card Error, and Capacity Warning.
Setting up notifications for Disconnection and IP Conflict events.
Configuring detection for excessive unsuccessful login attempts.
Setting up alarm types, operation modes, and alarm tones.
Setting device name, language, video standard, and log quantity.
Setting and synchronizing camera date, time, and time zone.
Managing user accounts and their permissions.
Creating, modifying, and deleting user groups and assigning permissions.
Process to create a new custom group and assign specific permissions.
Editing existing group permissions.
Removing custom user groups.
Creating, modifying, and deleting individual user accounts.
Process to create a new user account with specific permissions.
Editing user account details, password, and permissions.
Removing user accounts from the system.
Restoring the camera to its factory default settings.
Saving and loading camera configuration settings.
Setting up automatic reboot and old file deletion schedules.
Procedure for updating the camera's firmware.
Displaying firmware, web client, and ONVIF version details.
Viewing, backing up, and deleting system and event logs.
Saving log files for record-keeping and analysis.
Clearing log files from the system.
Displaying a list of currently logged-in users.
To Next Page
