| 13
800-23288 - A - 07/2017
About This Document
This manual is intended for system installers, administrators, and users. It contains
instructions for accessing, configuring, and operating Honeywell’s 2 MP and 4 MP
Performance Series IP cameras.
Overview of Contents
This document contains the following chapters:
• Chapter 1, Getting Started with the ConfigTool, describes how to install the Config Tool
to access the camera remotely from a web browser. It also describes how to update your
camera’s firmware.
• Chapter 2, Logging In and Viewing Live Video, describes how to log in to the camera and
how to use the Live interface.
• Chapter 3, Playing Back Recorded Video (H4W4PER2/HBW4PER2), describes how to
play back and export recorded video and snapshots.
• Chapter 4, Configuring Camera Settings, describes how to set up camera and streaming
properties.
• Chapter 5, Configuring Network Settings, describes options for setting up the camera
on a network. (For advanced users only.)
• Chapter 6, Configuring Recording Settings, describes how to set up a recording
schedule and how to manage recording and storage settings.
• Chapter 7, Configuring Events and Alarms, describes how to configure video and system
event settings and alarms.
• Chapter 8, Configuring System Settings, describes how to set the system language and
date and time, manage useraccounts and permissions, set up maintenance tasks,
upgrade the camera’s firmware, and reset the camera to its factory settings.
To Next Page
Loading...
Need help?
General
