To Next PageTo Next Page
Need help?Do you have a question about the Honeywell H4W2PER2 and is the answer not in the manual?
General| Model | H4W2PER2 |
|---|---|
| Series | Performance Series |
| Night Vision | Yes |
| Weather Resistance | IP66 |
| Housing | Metal |
| Power Source | PoE (Power over Ethernet) |
| Motion Detection | Yes |
| IR Distance | Up to 30m |
| Connectivity | Ethernet |
| Audio | 2-way Audio |
| Storage | MicroSD card slot (up to 128GB) |
Guide to configuring static or dynamic IP addresses for single or multiple cameras.
Process for updating camera firmware for single or multiple devices via the IPC Tool.
Steps to log in to the camera using its web client, including prerequisites and default credentials.
Explains the live view window layout, controls, and configuration options for monitoring video.
Detailed steps on how to search and play recorded video files using the calendar and timeline.
Adjusts camera settings like picture, exposure, white balance, and IR light.
Sets up video stream properties including format, resolution, frame rate, and bit rate.
How to set IP addresses, subnet masks, and default gateways for camera network configuration.
Sets up motion, tampering, and scene change detection parameters and alarm periods.
Configures audio detection for input abnormality and intensity changes, with sensitivity settings.
Details how to set up face detection areas, enhancement, and event recording.
Configures people counting rules, direction, and alarm triggers.
Manages SD card and network events, including warnings and illegal access alerts.
Sets up recording and snapshot schedules based on time periods and modes.
Assigns storage paths for video files and snapshots (microSD, FTP, NAS).
Manages recording length, pre-event recording, disk full behavior, and stream selection.
Manages user accounts, groups, permissions, and security settings.
Sets up various alarm types like motion detection, disk full, tampering, and illegal access.
