Performance Series IP Camera Software Configuration Guide
60
8 Configuring Storage Settings
This chapter contains the following sections:
• Configuring Schedule Settings, page 60
• Configuring Destination Settings, page 61
• Configuring Recording Control, page 64
Configuring Schedule Settings
Configuring Record Schedule
Go to Setup Storage Setup Schedule Record Schedule.
You can add or remove schedules for recording. There are three recording modes: General
(auto), Motion, and Alarm. You can configure up to nine recording periods per day.
Figure 8-1 Record Schedule
Record Schedule Color Codes:
• Green: General recording
• Yellow: Motion detection recording
• Red: Alarm recording
Configuring Snapshot Schedule
Follow the same procedure to configure the settings on the Record Schedule tab.
To Next Page
Loading...
