Need help?Do you have a question about the Honeywell equIP H4W2GR1V and is the answer not in the manual?
General| Model | H4W2GR1V |
|---|---|
| Series | equIP |
| Maximum Resolution | 1920 x 1080 |
| Night Vision | Yes |
| IR Distance | Up to 30m (98ft) |
| Video Compression | H.265 / H.264 / MJPEG |
| Weather Resistance | IP67 |
| Type | Network Camera |
| Lens | 2.8 mm |
| Day/Night | Yes (ICR) |
| Power Supply | PoE (802.3af) or 12VDC |
| Image Sensor | 1/2.8" Progressive Scan CMOS |
| Operating Temperature | -40°C to 50°C (-40°F to 122°F) |
Guidelines for safe installation, operation, and maintenance of the camera.
Steps to install the utility for camera setup and management.
Procedure for setting a static IP address for the camera.
Instructions for updating the camera's firmware.
Initial login process and password change for the web interface.
Adjusting camera properties like picture, exposure, and WDR.
Setting up IP addresses, subnet masks, and gateways.
Setting up camera alarms for external inputs.
Setting up motion detection zones and parameters.
Configuring detection for camera tampering or defocus.
Setting up detection for changes in the video scene.
Configuring detection for audio input abnormalities or changes.
Setting up Intelligent Video System analysis rules.
Configuring the camera for face detection.
Setting up people counting analytics.
Setting up heat map analytics for activity visualization.
Setting up daily, weekly, and holiday recording schedules.
Configuring where recorded video and snapshots are saved.
Adjusting recording length, pre-event recording, and disk full behavior.
Managing user accounts, groups, and permissions.
Restoring camera settings to factory defaults.
Instructions for installing new camera firmware.
To Next Page