Need help?Do you have a question about the Honeywell equIP HCW2GV and is the answer not in the manual?
General| Series | equIP |
|---|---|
| Resolution | 2MP |
| Max. Resolution | 1920 x 1080 |
| Lens Type | Fixed |
| Focal Length | 2.8 mm |
| Night Vision | Yes |
| Connectivity | Wired |
| Ingress Protection | IP67 |
| Day/Night | Yes |
| Minimum Illumination | 0.01 Lux |
| IR Range | 30 meters |
| Video Compression | H.264 |
| Operating Temperature | -30 °C to 60 °C |
| Power Supply | PoE (802.3af) |
General safety guidelines for installation and operation of the camera.
Process for logging into the camera's web client using credentials.
Adjusting image properties like brightness, contrast, saturation, and sharpness.
Managing anti-flicker, exposure mode, auto iris, and digital noise reduction.
Adjusting BLC, HLC, WDR, and SAC for optimal image quality under varying light.
Defining video format, resolution, frame rate, and bit rate for streams.
Enabling and configuring audio streams, including input type and volume.
Setting up IP addresses, subnet masks, and gateway for IPv4 and IPv6.
Setting up email notifications for events, including SMTP server and recipient details.
Setting up alarm inputs, outputs, recording, and email notifications for alarm triggers.
Setting up motion detection areas, sensitivity, and recording triggers.
Configuring detection for camera tampering or defocusing.
Setting up detection for changes in the video scene, like lens obstruction.
Configuring audio detection for input abnormalities or intensity changes.
Setting up Intelligent Video System analytics rules like tripwire and intrusion.
Setting up face detection areas and enabling face enhancement.
Configuring people counting analytics, including direction and alarm triggers.
Enabling and configuring heat map analytics to visualize activity zones.
Setting up daily, weekly, and holiday schedules for video recording.
Specifying storage paths for recorded video and snapshots (SD card, FTP, NAS).
Setting record length, pre-event recording, and auto-delete options.
Setting the camera's date, time, and time zone, including NTP synchronization.
Managing user accounts, groups, and permissions for system access.
Adding new user accounts with specific credentials and permissions.
Detailed technical specifications for specific bullet camera models.
Detailed technical specifications for specific box camera models.
Detailed technical specifications for specific indoor dome camera models.
Detailed technical specifications for specific outdoor dome camera models.
Detailed technical specifications for the H2W2GR1 micro dome camera.
To Next Page