Need help?Do you have a question about the Honeywell equIP H3W4GR1V and is the answer not in the manual?
General| Series | equIP Series |
|---|---|
| Resolution | 4 MP |
| IR Range | Up to 30 m (98 ft) |
| Operating Temperature | -30°C to 60°C (-22°F to 140°F) |
| Weather Resistance | IP67 |
| Video Compression | H.265, H.264, MJPEG |
| Power Supply | 12 VDC/PoE (802.3af) |
| Storage | MicroSD (up to 128 GB) |
Instructions for installing the IPC Tool utility for camera setup and management.
Steps to locate and identify Honeywell cameras on the network using the IPC Tool.
Guide on how to manually assign a static IP address to a camera.
Procedure for updating camera firmware to the latest version.
Steps to access the camera's web interface for configuration and live view.
Instructions on how to access the camera's web interface using credentials.
Configuring stream types (Main, Sub) and protocols (TCP, UDP) for live video.
Steps to select and play recorded video files from storage.
How to download full video files or specific clips to a local drive.
Adjusting image properties, exposure, white balance, and day/night modes.
Settings for profiles, picture adjustments (brightness, contrast), and image orientation.
Configuring anti-flicker, exposure modes, auto iris, and digital noise reduction.
Applying BLC, HLC, WDR, or SAC adjustments for optimal image lighting.
Setting video compression, resolution, frame rate, and bit rate for streams.
Enabling and configuring audio input, output, and volume levels.
Setting up network parameters like IP address, subnet mask, and gateway.
Configuring IPv4 settings, including static or DHCP assignment.
Enabling or disabling ONVIF authentication for interoperability.
Setting up alarm inputs, outputs, delays, and recording triggers.
Configuring motion detection areas, sensitivity, and recording triggers.
Detecting and responding to camera tampering or defocusing.
Configuring the detection of faces and associated actions.
Setting up people counting analytics and reporting.
Specifying storage paths for recorded video and snapshots (SD card, FTP, NAS).
Adjusting record length, pre-event recording, and auto-delete settings.
Managing user accounts, groups, and permissions.
Procedure for installing new firmware onto the camera.
Detailed technical specifications for HBW2GR3V, HBW2GR1V, and HBL2GR1V bullet cameras.
Detailed technical specifications for HCL2GV and HCW2GV box cameras.
Detailed technical specifications for H3W2GR1V and H3W4GR1V indoor dome cameras.
Detailed technical specifications for H4W2GR1V, H4L2GR1V, and H4W4GR1V outdoor dome cameras.
Detailed technical specifications for the H2W2GR1 micro dome camera.
To Next Page