About This Document
This manual is intended for system installers, administrators, and users of Honeywell’s equIP®
Series 2MP/4MP LOW LIGHT WDR IP cameras and contains instructions for accessing,
configuring, and operating the cameras.
Overview of Contents
This manual contains the following chapters and appendixes:
• Chapter 1, Accessing the Camera, describes how to access the camera remotely from a web
browser.
• Chapter 2, Logging In and Viewing Live Video, describes how to log in to the camera and how
to use the Live interface.
• Chapter 3, Playing Back Recorded Video, describes how to play back and export recorded
video and snapshots.
• Chapter 4, Configuring Video and Audio Settings, describes how to set up video and audio
streams.
• Chapter 5, Configuring Network Settings, describes how to set up the camera on a network.
(For advanced users only.)
• Chapter 6, Configuring Event Settings, provides instructions for configuring alarm
inputs/outputs, motion detection, audio detection, tampering detection, and system event
settings.
• Chapter 7, Intelligent Analytics System, describes how to access the Intelligent Analytics
System.
• Chapter 8, Configuring Recording Settings, describes how to set up a recording schedule
and how to manage recording and storage settings.
• Chapter 9, Configuring System Settings, provides instructions for configuring language and
date and time options, managing user accounts and permissions, setting maintenance
tasks, upgrading firmware, and resetting a camera to its factory defaults.
• Chapter 10, Appendix A Technical Specifications, lists camera specifications.
To Next Page
Loading...
Need help?
General
