Honeywell H4W4PER2 User Manual

Configuring Camera Settings | 35
800-23288 - A - 07/2017
Configuring Zoom and Focus Settings
Note This section only applies to H4W4PER2 and HBW4PER2.
You can configure zoom and focus on the Setup > Camera > Conditions > Zoom and Focus
page.
To adjust the zoom magnification, drag the slider right or left. Click the + and - signs to make
fine adjustments. The Speed value determines the magnitude of the adjustment.
To adjust the focus manually, drag the slider right or left. Click the + and - signs to make fine
adjustments. The Speed value determines the magnitude of the adjustment.
To set the focus automatically, click Auto Focus.
To restore the default zoom and focus settings, click Restore All.

Honeywell H4W4PER2 Specifications

General

Brand	Honeywell
Model	H4W4PER2
Category	Security Camera
Language	English