Honeywell
31
Figure 4-22
Enable DDNS: Click to determine whether to use Dynamic Domain Name Server
Server Type: Select DDNS server type (There are Dyndns/ PeanutHull/ NO-IP/ 3322/ DnsDynamic five
types selectable)
Server Name: Input server name, for example, member.3322.org
Port: Input port No.
Username: Input user name
Password: Input password
Confirm pwd: Input the password again to confirm it
Domain: Input the standby domain
After all parameters setting completed, click “Save” and the it comes into effect immediately.
NTP Settings
Network High Speed Dome “NTP Settings” interface as figure 4-23.
To Next Page
Loading...
