Honeywell HEIPTZ-2201W-IR - PTZ Control Settings

Honeywell
21
Figure 4-12
 Device Name: Edit the camera name
 Device Sn: Display the device Sn
 Device Type: Display the device type
 Serial No. : Display the product serial No.
 Master Version: Display the software version date
 Hardware Version: Display the hardware version number
 Format: Switch to select the PAL and NTSC image scanning system
 Device Time: Set and display the device current time
After all parameters setting completed, click “Save” and then it comes into effect immediately.
PTZ setting
Network High Speed Dome “ePTZ Set” interface as figure 4-13.