Honeywell HEIPTZ-2201W-IR - Internet Connection Methods; Fixed IP Internet Mode

Appendix
48
Log in Network High Speed Dome via IE browser. Then turn to “ Network Setting” interface, click DHCP”
After setting all the parameters, click save and restart to make the parameters valid.
Internet
There are three ways to connect Network High Speed Dome to the Internet.
1. Fixed IP mode
2. ADSL broadband and router share online mode( Dynamic get the IP address mode)
3. PPPOE dial-up access
After Network High Speed Dome is connected to Internet, remote Internet users can visit it directly via domain name
or IP address.
Fixed IP mode
See below picture for the network topology:
Please refer to below picture for the network settings: