To Next PageTo Next Page
Need help?Do you have a question about the Honeywell HBW2PER2 and is the answer not in the manual?
General| Ingress Protection | IP66 |
|---|---|
| Housing | Metal |
| Night Vision | Yes |
| Weather Resistance | Yes |
| Two-Way Audio | No |
| Motion Detection | Yes |
| Resolution | 2MP (1920 x 1080) |
| Lens | 2.8 mm fixed |
| IR Distance | 30m |
| Operating Temperature | -30°C to +60°C (-22°F to +140°F) |
| Power Supply | 12V DC |
| Connectivity | Ethernet |
Details the equipment's compliance with FCC rules for digital devices and potential interference.
States compliance of the digital apparatus with Canadian ICES-003 standards.
Confirms equipment compliance with specific EU directives for EMC, safety, and RoHS.
Provides guidance on the proper disposal of the product according to EU regulations.
Provides a general overview of Honeywell Performance Series IP cameras and their capabilities.
Details the primary features of the Performance Series IP cameras, including camera functions and capabilities.
Step-by-step guide to install the IPC Tool utility for camera management.
Instructions on how to use the IPC Tool to locate and identify cameras on the network.
Procedure for configuring static or dynamic IP addresses for cameras using IPC Tool.
Details the process for updating camera firmware using the IPC Tool utility.
Explains how to access the camera's web interface via a browser after discovery.
Guides on how to log into the camera's web interface to view live video.
Details the installation process for the necessary browser plug-in for live view.
Describes the layout and controls of the live video viewing interface.
Explains how to configure video stream protocols and settings within the live view.
Details the system menu options for navigating to different camera interfaces like playback and setup.
Describes the toolbar controls for managing live video, such as zoom and snapshot.
Covers adjusting image properties like brightness, contrast, and screen aspect ratio in the live view.
Introduces the chapter on playing back recorded video and snapshots.
Guides on how to access and play recorded video files from the camera.
Describes the layout and components of the video playback interface.
Details the controls used for playing, pausing, and navigating recorded video playback.
Instructions on how to select and play video files using the calendar interface.
Explains how to filter recorded files based on their recording type (e.g., motion, alarm).
Describes how to adjust the playback timeline to view different time scales of recorded video.
Details the use of playback assistant tools for zooming and taking snapshots during playback.
Explains how to zoom in and out of the video playback for detailed viewing.
Describes how to capture still images (snapshots) from the video playback.
Guides on how to select and save segments of recorded video as clips.
Instructions on how to find and view captured snapshot images.
Details how to adjust image settings like brightness, contrast, and white balance.
Explains how to view and configure various camera property settings.
Describes how to select and manage camera profiles (Normal, Day, Night) for different lighting conditions.
Covers adjusting picture style and image parameters like brightness, contrast, saturation, and sharpness.
Details how to adjust the overall brightness of the video image.
Explains how to adjust color saturation and strength in the video.
Details how to adjust the sharpness of the video image.
Covers adjusting the image's dynamic range and non-linear brightness.
Describes the function to flip the video image horizontally from left to right.
Explains the Angle of View settings for rotating the video image.
Covers anti-flicker modes, exposure modes, auto iris, and digital noise reduction.
Details settings to reduce image flicker in different environments (Outdoor, 50Hz, 60Hz).
Explains exposure modes like Auto, Gain Priority, Shutter Priority, and Manual.
Describes setting gain value while camera adjusts exposure via shutter speed.
Describes setting shutter speed while camera adjusts exposure via gain.
Explains 3D Noise Reduction for improving video quality in low light.
Details adjusting image quality parameters, likely related to dynamic range or color.
Covers backlight, highlight, and wide dynamic range adjustments for image clarity.
Explains Wide Dynamic Range for balancing brightness in challenging scenes.
Details Backlight Compensation for improving visibility in dark areas.
Describes Highlight Compensation for reducing glare and halos.
Explains how to adjust color hue and balance for accurate video representation.
Sets automatic white balance for accurate color temperature in video.
Optimizes white balance for natural lighting conditions.
Adjusts white balance for scenes illuminated by yellow-tinted street lighting.
Optimizes white balance for outdoor environments.
Allows manual adjustment of red and blue gain for white balance.
Configures day/night switching, sensitivity, and delay time for color/B&W video.
Adjusts the threshold for switching between color and black/white video modes.
Sets the time delay for switching between color and black/white video modes.
Details settings for infrared illumination, including manual, smart IR, and off modes.
Enables management of camera profiles (Normal, Day, Night) and their activation.
Enables the Normal profile, which is always active.
Keeps either the Day or Night profile active continuously.
Allows setting a schedule for switching between Day and Night profiles.
Guides on adjusting zoom focal length and focus definition for camera lenses.
Details how to configure video streaming properties like format, resolution, and bit rate.
Covers settings for video encoding format, resolution, frame rate, and bit rate.
Explains the available video encoding modes: H.264, H.264H, H.264B, and MJPEG.
Describes the Smart Codec feature for optimizing storage and bandwidth usage.
Details the selectable video resolutions and their recommended bit stream values.
Explains how to set the frame rate for video streams, specifying NTSC/PAL differences.
Describes Constant Bit Rate (CBR) and Variable Bit Rate (VBR) options for video streams.
Details setting the interval between I-frames for video compression efficiency.
Covers enabling watermarks to verify video integrity.
Covers configuring snapshot settings, including type, image size, quality, and interval.
Selects whether snapshots are taken based on schedule or events.
Notes that image size is determined by main stream resolution and is not configurable.
Sets the quality level for captured snapshots.
Defines the frequency at which snapshots are taken.
Covers overlaying text, time, channel titles, and pictures onto the video stream.
Explains how to mask areas of the video for privacy and manage these masks.
Enables overlaying channel information onto the video window.
Enables overlaying time information onto the video window.
Allows overlaying custom text onto the video stream.
Enables overlaying custom pictures onto the video stream.
Explains how to overlay people counting information onto the video.
Covers defining Regions of Interest for specific analysis or quality settings.
Details how to configure storage paths for snapshots and recorded video clips.
Guides on configuring audio input type, noise filtering, and volume settings.
Guides on setting up IP addresses, subnet masks, and default gateways for network connectivity.
Details how to configure network ports for various camera communication protocols like HTTP, RTSP, and HTTPS.
Details ONVIF settings for interoperability between IP-based security products.
Explains RTSP Over TLS settings for encrypting video stream transmission.
Explains how to configure PPPoE settings for establishing an internet connection.
Covers the setup for sending email notifications and alerts from the camera.
Details UPnP settings for establishing network mapping between LAN and public networks.
Explains SNMP settings for collecting and organizing network management information.
Details Bonjour settings for zero-configuration networking and device discovery.
Covers multicast settings for efficient data packet transmission to multiple hosts.
Explains IEEE802.1X for network access control and user authentication.
Details Quality of Service settings to fix network delays and improve transmission quality.
Covers installing security certificates for secure HTTPS communication.
Explains how to generate a certificate request for signing and importing to the camera.
Details how to configure video detection parameters such as motion detection and scene change.
Guides on setting up motion detection parameters, including alarm periods and sensitivity.
Defines the active time periods for motion detection events.
Allows users to define specific regions within the video for motion detection.
Configures settings to detect and alert on camera tampering events.
Sets up alerts for when the camera's view or scene is altered.
Guides on setting up audio detection for abnormalities or intensity changes.
Acts as a master switch for enabling intelligent analytics like Face and People Counting.
Details settings for face detection, including area setup and enhancement.
Guides on setting up people counting parameters and rules.
Details the setup for people counting, including rule drawing and direction settings.
Explains how to generate and export reports for people counting data.
Covers configuration for system events like SD card status and network disconnections.
Details settings for SD card events such as 'No SD Card', 'SD Card Error', and 'Capacity Warning'.
Covers configuring alerts for network events like disconnections or IP conflicts.
Details settings to trigger alarms for unauthorized login attempts.
Guides on setting up recording and snapshot schedules.
Details how to configure the daily schedule for recording video.
Details how to configure the daily schedule for taking snapshots.
Allows designation of holidays to alter recording or snapshot schedules.
Covers setting up where recorded video and snapshots are saved.
Details the storage paths for saving video and snapshots (microSD, FTP, NAS).
Details settings for saving files to the local microSD card.
Covers configuration for saving files to an FTP server.
Details settings for saving files to a Network Attached Storage (NAS) device.
Guides on setting recording length, pre-event recording, and disk full behavior.
Covers basic system configurations like device name, language, and video standard.
Details how to configure the camera's date, time, and time zone settings.
Details how to create and manage user accounts, groups, and their permissions.
Covers adding/removing users and managing user accounts and permissions.
Details the process of adding new users with specific group and permission settings.
Explains how to modify existing user properties, including group, password, and rights.
Covers adding, removing, and modifying user groups and their permissions.
Details the process of creating new user groups with assigned authority lists.
Explains security features like IP filtering and approved users to restrict access.
Details how to restrict camera access based on IP/MAC addresses.
Guides on resetting camera configurations to default or factory settings.
Covers importing and exporting system setup files for backup or transfer.
Details settings for automatic reboots and other maintenance tasks.
Explains how to import and apply firmware upgrades to the camera.
Displays system hardware features, software version, and release date.
Covers viewing system logs, including event logs and user activity.
Shows currently logged-in users, their groups, IP addresses, and login times.
Provides a matrix showing NVR integration capacity for frame rate and resolution.
Lists and explains various symbols that may appear on the camera hardware.
Details the operational, video, network, electrical, mechanical, environmental, and regulatory specifications.
Details the operational, video, network, electrical, mechanical, environmental, and regulatory specifications.
Details the operational, video, network, electrical, mechanical, environmental, and regulatory specifications.
Details the operational, video, network, electrical, mechanical, environmental, and regulatory specifications.
Details the operational, video, network, electrical, mechanical, environmental, and regulatory specifications.
Details the operational, video, network, electrical, mechanical, environmental, and regulatory specifications.
Details the operational, video, network, electrical, mechanical, environmental, and regulatory specifications.
Details the operational, video, network, electrical, mechanical, environmental, and regulatory specifications.
Details the operational, video, network, electrical, mechanical, environmental, and regulatory specifications.
Details the operational, video, network, electrical, mechanical, environmental, and regulatory specifications.
Details the operational, video, network, electrical, mechanical, environmental, and regulatory specifications.
Details the operational, video, network, electrical, mechanical, environmental, and regulatory specifications.
Details the operational, video, network, electrical, mechanical, environmental, and regulatory specifications.
Details the operational, video, network, electrical, mechanical, environmental, and regulatory specifications.
Details the operational, video, network, electrical, mechanical, environmental, and regulatory specifications.
Details the operational, video, network, electrical, mechanical, environmental, and regulatory specifications.
Details the operational, video, network, electrical, mechanical, environmental, and regulatory specifications.
Details the operational, video, network, electrical, mechanical, environmental, and regulatory specifications.
Details the operational, video, network, electrical, mechanical, environmental, and regulatory specifications.
Details the operational, video, network, electrical, mechanical, environmental, and regulatory specifications.
Details the operational, video, network, electrical, mechanical, environmental, and regulatory specifications.
