Installing the PRO4200 Two Reader Module
Wiring Diagram for Connectors TB1,TB7-9
PRO4200 Two-reader module User Guide, Document 800-25698V1 19
Note:
The SIO board port for a PRO42IC in WIN-PAK is port 6 and is set as the
default.
Each reader port supports a reader with TTL (D1/D0, Clock/Data), F/2F, or 2-wire
RS-485 signaling. Power to the reader is selectable:
Input on supervised F/2F readers may be unsupervised or supervised (supervised
shown).
Reader Wiring
The following Honeywell reader module numbers have been approved by UL for use
with the PRO4200: OM40BHONA, OM55BHONA, OP10HONE, OP30HONE,
Reader\ Input\ Output 0 1
Reader\ Input\ Output 1 2
To Next Page
Loading...
