7
PROGRAMMING YOUR THERMOSTAT
STEP 1
SET THE CURRENT DAY AND TIME
You can program this thermostat either
on the wall or in your hand. SEE
PAGE 31 TO FIND OUT HOW TO
REMOVE THE THERMOSTAT FROM
THE WALL.
Always press the keys with your
fingertip or similar blunt tool. Sharp
instruments like a pen or pencil point
can damage the keyboard.
NOTE: Check the glossary, page 35,
for definitions of unfamiliar words.
Press and release. The display
shows 1:00 PM Mon.
Press and hold until the current
day appears in the display.
Press and hold until the current
time appears in the display. Be
sure AM or PM appears as
desired.
You have programmed the
current day and time. Go on to
Step 2.
SET
PRESENT
DAY/TIME
AHEAD
BACK
DAY
MON
PM
TUE
PM
TUE
PM
To Next Page
Loading...
