The “Main door” and “Back door” icons are usually used for bell pushes. The other
icons are intended for use with other compatible devices, such as wireless motion
detectors and telephone ring detectors (check availability). Icons numbered 1 to 6
are also included. The icons are self-adhesive, supplied in strips of 3. They can be
changed, if required, by opening the sliding window of the chime and gently peeling
off the strips.
If desired, the strips can be cut into individual
icons and fixed to the chime in a different
order.
Use the Programming procedure to change
the Icon associated with a push.
Use of Icons
To Next Page
Loading...
Need help?
General
