Premium Portable Plus Wirefree Chime with Push
Thank you for choosing this Honeywell product. Please use the following instruc-
tions to ensure correct installation and use. Keep these notes in a safe place for
future reference.
Checking Pack Contents
Unpack your chime kit and identify the
following parts:
• Chime
• Chime bracket
• Bell push
• CR2032 battery for bell push
• 4 self-adhesive icons strips (2 pre-
fitted on chime)
• 2 screws for push
• 2 screws for chime wall bracket
• 2 wall plugs
• Adhesive pad
You will need:
• A Phillips-head screwdriver
• A small flat-bladed screwdriver
• A 1/4-in. (6 mm) masonry drill
• 4 LR14 “C” alkaline batteries
To Next Page
Loading...
Need help?
General
